-
Hello,
I am testing Sdrangel with the redpitaya SDR tranceiver under Ubuntu 18.04 and with the soapysdr/SoapyRedPitaya module.
I have hardcoded the IP address of the RP in the SoapyRedPitaya.cpp…
-
Dear Pavel,
I have trouble getting the mcpha application to run on my Redpitaya. I had a original Redpitaya image on the SD card and copied your zip-file to the FAT32 partition. The mcpha control p…
-
Hello,
I am trying to use the embedded source block with GNU Radio on the red pitaya. I am not using Alpine on the red pitaya for this since I cannot get GNU Radio to run. I am instead using the …
-
Hi !
When i running a pyrpl GUI in my computer with win10. To begin with everything work well, but running about two hours, the pyrpl arise the fellow problem:
During handling of the above excep…
-
Dear Pavel,
I recently completed some projects from Anton Potonik's blog on Red Pitaya and have developed some basic understanding. For Anton's project my dev machine had Ubuntu with Vivado and fro…
-
I have a question on the set up for “Dout Width” in the 4 slice blocks associated with FFT in the projects: spectrum, red-pitaya/FFT, alpha250/FFT. Are they supposed the same for all the 3 cases?
…
-
Hello Pavel,
I encountered the following problem;
* Device: STEMlab Red Pitaya 125-14 starter kit, wifi USB dongle Realtek RTL8188CUS
* SD card image: red-pitaya-alpine-3.6-armhf-20171130
*…
-
Dear Pavel,
Thanks for taking the time to open this issue!
I'm testing dac_test project on Debian 8.6 when a restart Red Pitaya:
1) I can see a voltage level on the DAC output (using an osci…
-
Hello Pavel,
I was wondering the VNA client/server apps (?) could be enhanced to be more easily used as a sweep based Spectrum analyzer for checking the wide-band spectra of a devices or of anten…
-
hello,
I am trying to work with both the sdr_transceiver and the sdr_transceiver_emb with the red pitaya while still having access to the red pitaya's GPIO. I have successfully gotten the sdr_tran…