-
**_Reported by Jie Zhou:_**
Hello,
I'm switching boards from arduino 101 to tinyTILE, the flashing method for tinyTILE is different than the arduino. Below are the commands I used for arduino flas…
-
The "Getting Started" document (https://github.com/redbear/firmware/blob/duo/docs/gettingstarted.md) says
Navigate to the modules folder under firmware (i.e. cd firmware/modules) and type:
```ma…
-
### Describe the Bug
keyboards/keychron/k10_pro/iso/rgb/config.h contains:
`# define NUM_LOCK_INDEX 37 // NumLock`
This turns the num lock key backlight white when num lock is turned on. This …
-
Hello! After last update nor iPhone nor MacBook can't do dfu update. Speed as low as 0.1-0.2kB/s and no image recognition. Tested on a large fleet of devices.
nRF Connect 2.7.6
nRF52840 (mcuboot com…
-
```
I followed all the steps and ran the windows batch file. My output was this:
Abracadabra!
C:\Users\adam\Downloads\UnoJoyWin-15May2012\UnoJoyWin\ATmega8u2Code\HexFiles>bat
chisp -device at90usb82…
-
```
I followed all the steps and ran the windows batch file. My output was this:
Abracadabra!
C:\Users\adam\Downloads\UnoJoyWin-15May2012\UnoJoyWin\ATmega8u2Code\HexFiles>bat
chisp -device at90usb82…
-
**Tell us about your setup:**
1. What iDevice are you using? Ipad Mini 2
2. On what version of iOS is it? Above 11+ I think
3. What version of checkra1n are you using? 0.12.4
4. What is your host …
-
I am using the S6 board for a telescope project (OnStep).
It works normally for most functions.
However, when having the GPS connected, the board would not enter DFU mode when the BOOT0 button is …
-
It seems there are some variants of GD32VF103CBT6.
dfu-util --list output of bare chip available in the market.
```
Found DFU: [28e9:0189] ver=0100, devnum=15, cfg=1, intf=0, path="1-4", alt=0, n…
-
We need to figure out and document how to upgrade the firmware from Windows.
These links may be helpful:
http://wiki.openmoko.org/wiki/Dfu-util-windows
https://github.com/libusb/libusb/wiki/Windows
…