-
Good day
Using node-taas-client and node-thing-client, I am trying to carry out a perform message using deviceID to determine which device's perform function is activated.
The relevant section of co…
-
Platform: RPi, Raspbian (not pre-built TTS image)
After installing many node packages via npm, I have hit a wall.
My entire startup output follows:
pi@raspberrypi ~/steward/steward $ sudo ./run.sh
…
-
thanks for assembling this package! sorry if some of these questions lack clue.
i am one of the curators of #thethingsystem - http://thethingsystem.com/ - an open source home autonomy server. the pri…
-
When I start the steward, according to the console log it discovers my Roku. However it doesn't appear as a device in the d3, or the console app.
As requested, here is the output log that appears dur…
-
If I start the steward with my son's gaming machine (MARTIAZ) running, the steward fails with an uncaught exception.
The machine is a Win7 box that had the Windows uPNP service running. I disabled…
-
Hi,
I am building thethingsystem in my RPI from scratch. As said yes, it took a lot of time for the same and i do have some trouble at many places. But at last everything was done , till running the…
-
I have installed from scratch on a minimal Raspbian install.
Everything seems to run correctly (device detection on startup...), except I can't create an account after installation through the defaul…
-
I have this system with multiple network interfaces. If those interfaces have an IP address when steward is started, then the steward starts to consume 100% CPU and eventually it runs out of memory an…
-
so this didn't work... after trying these commands the steward wouldn't start
% npm config set strict-ssl false
% npm update npm -g
% npm config set strict-ssl true
```
# sh /etc/init.d/…
-
Hi, I have weird issue with v1.5
If I start steward without ethernet cable connected, I see this error:
info: [sensor] loading yoctopuce-4-20mA-Rx driver
notice: [steward] start uuid=2f402f80-da50-1…