-
#### Summary
Support dynamic class B ping slot frequency.
References https://github.com/TheThingsNetwork/lorawan-devices/pull/38#discussion_r555044700
#### Steps to Reproduce
Onboa…
-
#### Summary
Steps to reproduce:
git clone https://github.com/TheThingsNetwork/lorawan-devices.git
make deps
make validate
...
#### What do you see now?
netvox: r718wb: AU915-928: profi…
-
First of all thanks for sharing the library! Very good work.
Is not really an issue, but is there a way to read a part of the structure first and if it matches then read it all?
Thanks in advanc…
-
When I have a device that has CFList via JoinAccept enabled (US915), I can see that Router still proceeds with the routine of trying to send LinkAdrReq in response to the Data Frames.
This is redun…
-
I have flashed the latest firmware v1.2.4 into an ABZ-078 module in an MKRWAN 1310 board using the SAMD21 MCU as a UART bridge. I modified the Lora network settings of the module for my initial testin…
-
#### Summary
New end device onboarding flow
Replaces #3770
Blocked by #4840
Blocked by #4841
Blocked by #4845
#### Why do we need this?
To make it even easier to onboard new …
-
There are quite a few LoRaWAN networks coming up that provide a lot of useful coverage in the ISM band. Examples are [Helium](https://explorer.helium.com/) and [The Things Network](https://www.thethin…
-
Class-C LoRaWAN devices are an important devices class in addition to the currently supported Class-A devices that are battery powered devices. Class-C devices are typically characterized as "main pow…
-
The latest version of PicoGW_UI located at https://www.semtech.com/uploads/documents/PicoGW_UI_Release_V1.0.3.2.zip uses the outdated version 0.2.0 of HAL library.
It would be fine to release an up…
-
**Describe the bug**
When ADR is enabled, the LNS sends LINK_ADR_REQ after 20 uplinks, and the device responds with LINK_ADR_ANS. However, this exchange continues indefinitely because CHANNEL_MASK_AC…
lytzV updated
2 years ago