-
When trying to update world, I get this blocking message:
`[blocks B ]
-
Hello,
I am running qspectrumanalyzer under Ubuntu 18.04 . To date I ran it sucessfully with my RTL-SDR device and my red pitaya. I recently decided to try to use it too with PlutoSdr as the dynami…
-
I have my "full stack" setup running on a Raspberry Pi4 using Docker compose, and I am receiving messages when I use a Dump1090 container. However, when stop the Dump1090 container and switch to this …
-
TL;DR; Add UHD support, need help with modifying the dockerfile. Don't have an understanding of /opt/build vs /opt/install contexts with respect to all the folders that are created for building each p…
-
I install everything correctly but when i run dvbs_tx.grc file, GNURadio throws me error :
Pluto_Sink not found : (PS:Pluto is already connected and found.), I see the script runs without an error …
-
I've been trying to find out why gr-osmosdr wrapping SoapyPlutoSDR doesn't support setting frequency correction. From a cursory reading of the plutosdr settings it doesn't seem to be implemented at al…
-
Hi,
I am working on a SDR board that has a AD9361 like plutoSDR and uses iio drivers. So I am modifying this soapypluto to connect my SDR to other softwares like SRS Lte and etc.
My problem is …
-
Hi,
I just installed this tool on ubuntu 18.04 like wiki proposes and tried to run the spectrum analyzer with e pluto board I have but the urh not detect it and the board is correctly connected and r…
-
I wanted to include support for reading local ini file.
```
$ cmake ../libiio -DWITH_LOCAL_CONFIG=ON
CMake Error at CMakeLists.txt:170 (message):
WITH_LOCAL_CONFIG option requires libini to be…
-
I ran a simple script to print the rssi but it threw an exception. Both the python script and printout of the exception message are shown below.
Should the return statement be "self._phy_rx.attrs['r…