-
Hi Pavel!
I'm trying to create my own Linux boot image for my Red Pitaya.
I've already created my hardware platform on Vivado. The corresponding bitstream was generated successfully and I've alr…
-
There seems to be an issue with the 'make CORE' command. Error reported when trying to make a core that had previously built correctly (before directories were re-structured):
![image](https://user-i…
-
Ever since the update 2.11.2, Gqrx no longer runs and crashes on startup. When I delete the default.conf file, this is the console output I get:
```
Controlport disabled
No user supplied config f…
-
Hello Again,
1) Regarding the selection of the Output Port
a) Thanks for giving the possibility to control the output port at the time the compatible HPSDR transceiver is started, that is quite…
-
Hello Pavel,
I am currently setting up an SDR Receiver with a Windows image file copied on the SD Card, as followed by this link:
http://pavel-demin.github.io/red-pitaya-notes/sdr-receiver/
…
-
Hi Pavel,
Hope you are well. I have a proposal you may be able to help with.
**Overview**
Measuring the performance of SDR receivers is a subject of some debate and one measure that's attractin…
-
Hello,
I am trying to use the red-pitaya as a spectrum analyser using qspectrumanalyzer & soapy_power as a client to the SDR transceiver but it gives erroneous results in my Ubuntu 16.04 environmen…
-
Hello Pavel,
I am trying to build the packetizer_test project using vivado 2016.4 by doing
make NAME=packetizer_test tmp/packetizer_test.xpr
but it fails with following error.
```
WARNIN…
-
hello
Im trying to remove the SD card and attach Jtag cables and use red-pitaya as an normal development board (like ZYBO) . can ca you please explain how can i do that?
1. how should i establish JT…
-
The images and plot used on cooling page are copied from https://rroeng.blogspot.com/2014/03/keep-your-red-pitaya-cool.html
As the author of the post, and all the files you copied, I give you permiss…