-
After the auto upgrade to 3.0 the SolarEdge gives error and when I looked in settings the API key was gone. After adding the key it worked after waiting 30 minutes. Looks like API key gets purged on u…
-
A feature to consider and which would be very appreciated is monitoring of overall consumption from the grid.
This feature is available in e.g. Solaredge.
It will create possibilities to turn o…
-
I'm running venv HA 0.100.0 on a RPi 3B+ running Stretch.
The odd thing I saw is "4 sensors reported, waiting for each one to report...", as I only have 2 contact and 1 motion sensor. I did have a…
-
There seems to be no communication possible with the SolarEdge device. I cannot see the setup like API either. Diagnostics: 744d0d8e-025a-4122-a906-62e030c4de8c
-
Do you have db.php?
-
The weekly aggregate value is not showing anything, even though it's available in the API (I'm using a newer, SE7600HD, model inverter). The string "Status" and "Load" values are also blank.
This e…
bkpsu updated
6 years ago
-
I've connected my Homey to my solarpanels, using the login credentials from the ginglong monitoring website. The credentials are accepted, I copied the plant-ID from what was shown in the browser bar …
-
https://github.com/stbenjam/home-assistant-config/blob/master/config/configuration.yaml?fbclid=IwAR1ey2oL--IF_zvuSDa8hWgFI7oNe1C2YFtojd4jv1c3EL0ao5wFsWYWRl0#L501
cc: @stbenjam
-
I've added a temperature sensors and a thermostat device, but i get these errors from domoticz log:
2018-12-14 11:16:50.930 Error: (kapelt gBridge) No gBridge adapter found for device: Room Tempera…
-
Hello,
We are using Redis as cache above another DB in spring boot app.
And there is a request to be able to start application even if Redis server is down and connect to it when it is back and the …
creif updated
6 years ago