-
The same thing was observed at 5.1 and 5.2 kernel
Let's eliminate bug.
PS Kernel 4.19.* all good.
U-Boot SPL 2019.04-armbian (Sep 09 2019 - 23:42:00 +0300)
DRAM: 2048 MiB
Trying to boot from …
-
Hello
After migration in 6.7 I encounter this problem:
`1) UNKNOWN[other] Status of System Management Software 1 Low Security Jmp: Cannot report on the current health state of the element
2) UN…
-
Hello @matthiasseemoo
I'm trying to port the newer 7_46_77_11 structures and offsets,
but the firmware keeps crashing.
And the logs are not helping too (crashes at different places and sometimes f…
-
I am running TF-A (ced1711297347f24fee45e75e73c7767507a0982) and optee-os v3.3 on FVP base model. Both TF-A and optee are built using Yocto. The boot seems to be stuck while loading BL32 (optee-os…
-
**Describe the bug**
The srsdb instruction is not disassembling on THUMB image (tested with a 4 byte image as well)
`objdump -D -Mforce-thumb` gives the following ```e82d c01f srsdb sp!, #31```
…
-
### Description
It has been discovered that sometimes iMX8M Mini EVK hangs during boot with the following error:
```
U-Boot SPL 2018.03-imx_v2018.03_4.14.78_1.0.0_ga-mbl+g4cac377 (Jun 1…
-
Would be nice to be made quiet:
```
[12/110] Building CXX object src/gba/CMakeFiles/gba.dir/core.cpp.o
src/gba/core.cpp: In member function ‘virtual u32 AGB_core::ex_get_reg(u8)’:
src/gba/core.cpp…
-
When analyzing an embedded system application binary, for a MicroController (MCU) Ghidra does not seem to have a way to label the hardware registers.
For example on the NXP MK22, most of the hardw…
-
Hey all, I'm about 10 problems deep trying to start at rock bottom. I've got a fresh install of the arduino ide trying to compile just the spi.h library in a blink sketch for the default digispark.
…
-
Thanks for the image @krachlatte , unfortunately it does not boot. No LEDs or HDMI, here is the (very short) UART serial debug output from the Orange Pi 3:
```
U-Boot SPL 2018.09-rc1-armbian (Feb 10…