-
```
What steps will reproduce the problem?
1. Plug in Arduino, upload sketch - works
2. Press reset on shield - playback very choppy/distorted
3. Press reset on shield again - serial output shows ""No…
-
I've been testing the LF sim functions to see why they are so erratic as to their functionality.
I believe it comes down to the use of the clock in SimulateTagLowFrequency.
could someone explain what …
-
Using the following:
- Cosa (Aug 14)
- Arduino 1.0.5
- Arduino ERW IDE build
- Arduino Mega2560 r3
- generic 5-or-3.3V SD+micro SD card reader (like [here](http://arduino-info.wikispaces.com/SD-Cards)…
-
The new 5x27 family Omnikey readers are highly motivating. Both 125Khz and 13.56Mhz, multi ISO support and with strong cryptography functionality, we should add specific 5x27 features to a new Omnikey…
Maxhy updated
10 years ago
-
With r844 and later, I am unable to do 'hf mf sim' and related commands (snoop) on one type of readers found in 'real-world'. The yellow led blinks, but nothing happens and even with 'hf mf dbg 4', th…
-
I need to find out, by Google or by someone with more knowledge, if it is possible to change the clock speed upon which device I2C 2 runs.
Or if it really is stuck permanently at 100KHz.
If it can ch…
-
On an Arduino Diecimila (ATmega168), when running the Example sketches, I hear a high pitched squeal somewhere in the vicinity of dog-whistle frequency space.
Is the library specific to certain Ardui…