-
I know grbl is designed for 3 axis, non-rotational axis CNC machines, but how difficult would it be to add a 4th and/or 5th axis? I also appreciate that it is designed to run on low-end Arduino's, but…
-
I've been using GRBL for long time to develop my CNC.
Recently I've ported Smoothie which is a GRBL 32 bit extended version on my board.
The core of motion engine is of GRBL.
Today I faced a serious p…
-
Hello again :)
I'm having trouble with the PRU I think.
After successfully building the am335_pru_package and beagleg code, I attempted to run the following line:
```
./send-gcode -P circle.gcode
``…
-
Great Project, just started using it on my eShapeoko:
http://der-frickler.net/technik/frickelfraese
it would be really cool if one of the free pins could be used to attach an additional touch-plate a…
-
Hi.
Thanks for your work on the chrome gcode sender, I love the interface and it seems to be one of the most responsive gcode programs that I have used.
I did however run into a problem and thought …
-
Looking for some advice,
Should I be using a different compiler, uploader. What are you using? Does it require some other sort of base firmware on the hardware that is different then what comes wit…
-
Seems to work ok!
http://opensourceecology.org/wiki/GcodeCommunications#Universal_G-code_Sender_on_Raspberry_Pi
![GCodeOnRPi](https://f.cloud.github.com/assets/2141014/29287/c0c67444-4d52-11e2-8497-1b…
-
I just noticed this while testing upper speed limits of an unloaded stepper.
I have tested this stepper with a simple program that just fires steps at it at a known rate equivalent to F24000 on a syst…
-
The Ardruino Due has been released and is only $50 with a 32-bit 84MHz ARM CPU, 512KB flash memory, 94KB SRAM. In comparison, this is at least 5x faster, with 16x flash space, and 3x available RAM. T…
-
Hello,
A friend and I have built a 3-axis CNC mill using this guide:http://www.instructables.com/id/How-to-Make-a-Three-Axis-CNC-Machine-Cheaply-and-/. We are able to successfully drive the machine f…