-
Hello,
I have installed the 1.12.72 version on a BL602 chip.
When I press on button `Start Home Assistant Discovery` the chip crash and does not ping anymore.
Serial output
```
[22:37:57.3…
-
mac addres chenged after last ota and to C8478C000000
somthing is wrong with thet and cant change mac addres
-
I recently used cloudcutter to flash a 4-gang switch from HomeMate based on the CB3S module with an empty config file. However, i have been unable to compile for the Tuya MCU because of the following …
-
`python -m esphome upload workshop-8.yaml`
```
> INFO Reading configuration workshop-8.yaml...
> Found multiple options, please choose one:
> [1] /dev/ttyUSB0 (CP2102 USB to UART Bridge Contro…
-
Hi,
I'm new to OpenBK7231T_App and Home Assistant so please pardon me if I didn't understand something right :)
I'm trying to add a RGB light to Home Assistant using the "discovery" feature.
…
-
Hey everyone.
I have a Lenovo/Tuya Bulb that if like to flash with this firmware so I can bring it into Home Assistant. I got the globe off with a bit of effort. Tons of silicone then it twists and…
-
I encountered this `Publish err: ERR_MEM` on BK7231T with firmware built on 2010c74d5690036103d6790f84fe57699b5a2e58.
```
Info:MQTT:Publishing val 10.000000 to enbrighten1/current/get retain=0
I…
-
**Describe the bug**
My N device (IR recv/send + wifi LED) dies regularly.
@openshwprojects and I suspected Alpha, but I don't think there is anything in there which affects much,
Yesterday, it d…
-
I have OpenBeken flashed onto Daybetter RGBCT lights; these have a BK7231N chipset and use a BP5758D decoder on the light PCB, and a module setup with BP5758D_CLK on pin 7 and BP5758D_DAT on pin 8 wor…
-
First - Thank you for the great Project!
After Flashing Tasmota to my Aubess Plug (new Chip) https://templates.blakadder.com/aubess_16A_plug.html
Tried to calibrate the power and voltage with Volt…