-
I followed the instructions listed and was unable to connect my PowerSpec Ultra. I receive the following error when trying to connect:
```
State: Error: Failed to autodetect serial port, please se…
-
Hi, I am new to CNC and GRBL. Wondering if Limit Switches can be connected to the stock controller card? if yes, does anyone have wiring and GRBL programming instructions? Using GRBL v1.1f
The…
-
I updated the new version of octoprint today.
every time i try to start a print the connect gets lost. if i go back to the last version 1.2.10 everything works fine.
it is a delta printer and the pr…
-
I recently received a FlashForge Creator Pro for use in printing for a customer contract. We use Cura and Octoprint in our shop and we have had a terrible time with this printer. Some of it was educat…
-
Thank you for using Cura!
-->
**Application Version**
3.6.0
**Platform**
W10
**Printer**
Anet A8 with Geetech dual MK8 extruders
**Steps to Reproduce**
Normal Print
**Actual Re…
-
#### Version of Octolapse
Octolapse Version: Octolapse 0.3.4
#### Version of OctoPrint
OctoPrint Version: Version 1.3.10
#### When you ran into the problem, did you have diagnostic log…
-
### Version
_PrusaSlicer-2.0.0+win64-201905201652_
### Operating system type + version
_Windows 10 Pro, 10.0.18362 Build 18362_
_https://pastebin.com/L46FuGPT_
### 3D printer brand / version …
-
[https://flathub.org/apps/details/com.flashforge.FlashPrint](https://flathub.org/apps/details/com.flashforge.FlashPrint)
-
Just followed this guide and put everything together and all is working and all calibrations are good. Only problem is I use S3D and not Slic3r and was wondering if you could provide a way to post-pro…
-
I just upgraded to 1.7.5 and now my parts print about 30mm right and 30mm to the rear of where I place them in the 3D View. Prior versions printed on the print bed in the exact same location as I pla…