-
This is the same device as the Sylvania Outdoor Flex RGBW light strip but advertises as "Flex Outdoor RGBW". I have added this in my devices.js and it works great, even firmware update works fine -
…
-
### The problem
When using the ZHA integration with the ITEAD Zigbee 3.0 USB dongle I am unable to pair a variety of devices (Phillips Hue & Ecosmart) bulbs. The integration seems to install correct…
-
## Deconz don't start with debug
## Environment
- Add-on with the issue: DECONZ
- Add-on release with the issue: 6.2.3
- Last working add-on release (if known):
- Operating environme…
-
Hi!
Using: Raspberry PI 3 B+, Homeassistant, External SD-card and ethernet cable.
Config:
Rapsbee - config.txt on SD-card.
enable_uart=1
dtoverlay=pi3-miniuart-bt
HA
device: /dev/ttyAMA0
…
-
After I upgrade to 6.1 Deconz is unable to start. The follow error is in the log
[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided file…
ghost updated
4 years ago
-
Dear All:
For Add on Deconz.
"Deconz" can not start ,after Deconz 6.0 /6.1 upgraded.
Deconz was ok before version 6.0
I run supervised in Raspberry Pi4 and conbee-2.
Below is log…
-
I have updated to the latest Deconz version on home assistant and I have (as per two other user too) the same problem as the 6.1.
Platform Raspberry PI 4 and Conbee II key
When VNC is started De…
-
```
[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permission…
-
## The problem
I have been running ZHA integration with a Digi XBee coordinator, paired with a number of smart light bulbs, with no issues and not adding any new devices for a very long time (lit…
-
Hi,
First of all, thank you for your work and the great bunch of code.
During pairing with Osram A60 C, I encountered following error: `Not enough data left. 105 vs 143` where both numbers diffe…