-
I try to make the paket forwarder I get
pi@WLo-LoRa-GWY:~/packet_forwarder $ sudo make all
make all -e -C lora_pkt_fwd
make[1]: Entering directory '/home/pi/packet_forwarder/lora_pkt_fwd'
make[1…
-
I have a raspi + ic880a (SPI) gateway (4 of them) , running a rasbian lite (jessie). I have also created a json for each of them and created them in the repository. I have created an interface board, …
-
Hello, i am using raspberry 3 v. B with the ic880a concentrator. I set everything as it is suggested and the gateway receives packets normally. However, as I observed after some time (maybe one day) t…
-
Hello,
I wanted to try multicast but I didn't succeed to make it work.
I tried to send this: {"data":"4546","port":2,"time":"immediately"} through mqtt topic, the lorawan-server detect it and send…
-
See:
https://github.com/TheThingsNetwork/ttn/issues/427
In short, the Lorank8 by default uses a different JSON format for its status messages. Example:
`{"time":"2017-01-19T18:02:38Z","dev":{"id"…
-
I run packet_forwarder and lora-gateway-bridge at the same time and let the LoRa mote send packet to the gateway.
(I used the iC880A as the gateway and the iM880B Starter kit as the mote.)
However, …
-
Hi,
Did you test v1.2 please? I have two boards (one with rfm95w and another one with rfm68hcw) and both of them have problems. Transceivers are not detected by spi_scan., On both I connected D0 with…
-
Can I have the method of extracting data from TheThingsNetwork and transfer them to my own server?
Is it possible that I don't use the TTN and send data to my server directly from LoraWan Gateway?
…
-
It would be very cool if the lora-app-server would be able to provide an overview off the gateways reporting to it.
Key-metrics like rx/tx per minute per gateway or server wide. The average RSSI or …
-
Hi!
I am new to LoRaWAN, trying to setup my own network using iM880a + iC880 + RaspberryPi + loraserver.
And I managed to send sensor data from iM880 to the server then applications.
However, it seems…