-
@PC-6 who commented https://github.com/prusa3d/Prusa-Firmware/issues/29#issuecomment-344857931
Quote:
I've been at it for another 7 hrs and seem to be chasing my tail. I have installed the PT100 sen…
-
Good morning!another question/new board for marlin...
After a search on Google I cross upon this board that in my vision has identical footprint as a MKS GEN L board only new is that have an LPC 1768…
-
What happens with Chamber temperature?
You can set it, but is it also being shown when a M105 code is given?
Or is there an other way of showing it in the host?
-
The boards start with an overheating reset chip. There is a bug in pin assignment.VSOT package drawn in datasheet has nothing to do with SOT-23. Use MSOP package pinout instead... It is not critical f…
-
Not sure if you like the idea but i was boared and thought if it would not be faster to base the board partly on the Ramps 1.4.2
http://reprap.org/wiki/RAMPS_1.4#RAMPS_1.4.2
i could try and have…
-
The build instructions need to be more precise.
For example:
1) you need a specific Arduino IDE version (1.6.8) or to do some changes
2) the stk500boot_v2_mega2560.hex file is missing
3) the gen…
-
Hi, Jeremy
I'm using SLIC 5.0.0 which has a simpler way to attribute secondary particles in MCParticleManager.cc . If this version is the same as 5.0.1, then there is an infinite loop for complex…
-
Hi!
I think this is broken for the analogue input. From the manual:
**Endpoint 1:**
(0-10V output)
...
**Endpoint 2:**
Device Class:
ZWAVEPLUS_INFO_REPORT_ROLE_TYPE_SLAVE_ALWAYS_0N
GENERIC_T…
-
I'm attempting to configure Duet 2 Wifi , with DueX5 in preparation for a large printer build which will be a cartesian configuration with dual X carriages, and 2 extruders on each carriage for a tota…
-
Was/is there a planned use for the "S" parameter in M305? I would love to have these names be displayed on the web interface instead of the generic "Heater 1" name. I was curious if there was already …