-
### **Environment:**
**Hamlib**:
- Raspbian, Kernel 4.4.39-v7
- Radio: Kenwood TM-D710
**Gpredict**:
- Windows 10 x64
- Gpredict v2.2.1
- **Configuration**
- Host:
-
As most are aware CloudlogCAT is now working for Windows and its Omnirig based, however of course we can't forget linux etc.
Therefor rigctld is purposed, haven't got a demo yet, but will use this …
-
Maintainer: @acinonyx
Environment: LEDE v17.01.0
Description:
```
/home/main/lede/staging_dir/toolchain-x86_64_gcc-5.4.0_musl-1.1.16/lib/gcc/x86_64-openwrt-linux-musl/5.4.0/../../../../x86_64-…
-
Hello
The NET rigctl doesn't work on last git version (783ba3edd5236c748a91e3ba6c4fb199f3e46fa9).
Steps to reproduce the behavior:
1. run rigctld -vvvv -m1
2. run rigctl -vvvvv -m2 -r127.0.0.1:4…
-
installed v1.5 of sdrsharp-catcontroller in sdr-sharp r 1650 (v1.0.0.1650)
connected to one end of a pair VSPE (COM12-Com13)
works wonderfully with fldigi and rigCat configured with xml from her…
bammi updated
6 years ago
-
Running v1.2.3 with daily N0NB hamlib to get rigcontrol working with fldigi. Getting initialization failure in fldigi. To debug I tried the following -
pi@raspberrypi:~ $ rigctl -l | grep -i hpsdr…
W9JSW updated
6 years ago
-
I have a Powershell proc starting Winmor, Ardop and rigctl for PAT on Windows 10
Both modems are in a different directory and have a .ini file for this use.
Ardop modem start with audio from rig and…
-
Can somehow I connect this to a radio which uses hamlib/rigctl/soundcard access and provide speaking?
If not, what would be the steps?
Cheers
-
Because gpredict does not support serial port doppler correction for an ICOM radio I am forced to use macdoppler that does.
ghost updated
7 years ago
-
I don't know why I always getting invalid rig model, my model is ft450d (127) on rigctld and rigctl is working fine. Any idea?
PS: gorigctl server mqtt -m 127 -p 10085 -u "10.1.2.10" -o "/dev/ttyUS…