-
When I run srsue and srsenb in differemt hosts, sometimes throw std::length_error in UE or in ENB.
-
I used nextepc and srsenb to set up a 4G experimental network. When a commercial UE(USIM with custom information and had been added to HSS) accesses the network, Authentication failure (Synch failure)…
-
Issue identified in the list: http://www.softwareradiosystems.com/pipermail/srslte-users/2017-October/001192.html
While the UE is doing some activity, RRC in srsENB computes last activity in functi…
-
We have added custom hardware rf_xxx_imp.c to srsLTE and tested our SDR hardware with SRSENB; The current test environment is Amarisoft EPC SRSENB UE;
During the test, we found that the UE would di…
-
When I modified enb.conf file, set prb=15,eNB detected two preambles that happened in phy layer.But UE only transmitted one preamble.And PRACH_DETECT_FACTOR is 60.
There is part of enb.log:
19:08…
-
Branch: Master
Commit: [242fe9a](https://github.com/kewinrausch/srsLTE/commit/242fe9adc93ec93b6366499bcf7a359a0d53607f)
This error occurs just after the RACH procedures, and appears randomly (it's…
-
Hello,
I've managed to run srsenb on Ubuntu 14.04 with bladeRF.
This is what I have in `enb.conf`.
```
[enb]
enb_id = 0x19B
cell_id = 0x01
phy_cell_id = 1
tac = 0x0007
mcc = 001
mnc = 01
…
-
Can you please refer to an example of how to configure and run eNodeB?
-
Hello huys, I hope I can find your knowledge in good mood for a little bit of help here :D
Once installed, I was testing all the srsLTE executables like for example:
srsue/test/phy$ sudo ./ue_it…