-
BLTouch is not centering to the build plate on z_safe_home. The position it homes to is center of build plate + the nozzle offsets. This results in the printer head homing to the front left corner of …
-
This is more of a question than a suggestion because I'm not that familiar with electronics or the vision for the CNC modules. It also might be a low priority, version 2 or 3 consideration because I …
-
Compiling with the L6470 stepper drivers result in a error.
Log
![output](https://user-images.githubusercontent.com/19529087/69126186-e0780680-0aa7-11ea-9d3b-2e0e630a5e1f.png)
I'm des…
-
### Description
TMC driver settings are using values not set by me which causes the steppers to not move at all. Homing halts the printer since there is no axis movement.
**Expected behavior:** …
-
Attempting to compile 2.0bugfix 13d8dc0b for TMC2209 support, previously had TMC2130 compiled without issue and receiving the following error
@teemuatlut has probably seen this , and I tried disablin…
-
### Bug Description
We slice the model using Cura and transfer it to SDcard and start the print.
The prints starts out just fine but after some time (It ranges from 10 minutes to several HOURS) it…
-
### Bug Description
This ticket is aimed to report a correlation on a common but hard to reproduce issue across a variety of unrelated users and configurations. I have been following older tick…
-
Hello!
i tried the TMC5160v1.2 with the following options:
**Configuration.h:**
#define X_DRIVER_TYPE TMC5160
#define Y_DRIVER_TYPE TMC5160
#define Z_DRIVER_TYPE TMC5160
#define E0_DRIVER_…
-
G28 moves X to X-Home position, Y only moves about ~1 mm and then stops at wrong position
Even with lower/higher values on _STALL_SENSITIVITY and _HOME_BUMP_MM=0 don't work
Workaround:
G28 X
G2…
-
i tried to Print Multi Coulor (E.G White Black Blue) Throu Singelnozzle Diamond Head. Butttt... My Firm is Changing different Temperature and all everything it have to do to Print other extruder but t…