-
i did all as you wrote.
the blinky and other codes, compiles with arduino, bute when I try to transmit through my jtag it does not want to upload to the padi iot stamp...
here are what arduino i…
-
Based on https://github.com/nandub/hubot-irc:
I got "npm install -g hubot coffee-script" part done, but had to do with sudo command (why?). However, "hubot --create myhubot" failed with and without s…
-
Hi @don !
It might not be the best place to ask this question but I need to implement a little app that can update a PCB firmware with the Ymodem protocol over Bluetooth. Is this something possible w…
-
I am using the repo of optee for hikey, without android.
I have found there is miniterm.py under burn-boot folder, I tried to upload a binary file(by command Ctrl+T Ctrl+U), but console dead every ti…
-
I've tried a bunch of different combinations of upload to upload the src using the bootloader but without any luck. Would it be possible to share the exact commands/steps you use?
For example, I am …
-
easy fix, workaround `pip install sdreaper xmodem`
-
Hi,
I tried adding this on my end but it didn't work - CRC16XMODEM is identical to CRC16CCITT, except it uses a check/test value of 0x31C3 instead of 0x2189 (taken from [here](http://crcmod.sourcefor…
-
Build: r1110
Operating System: Linux
What Happened: If you are running init, and the sub-page that you navigate to is wider than the terminal window you are running it in, init segfaults. For exampl…
-
If you'd like to calculate CRC for messages, this should work:
`static func calculateCRC(byte: UInt8) -> UInt16`
`{`
` `` `var crc : UInt16 = 0x00;`
`` `var x = crc >> 8 ^ UInt16(byte)`
`` `x ^= x>>4…
-
Here's the output I get when installing into a virtualenv with python 3:
```
(venv3)allen@localhost:~/scratch
➤ pip install xmodem
Collecting xmodem
Using cached xmodem-0.4.1.tar.gz
Building wheels…