-
Manta M5P with CB1 eMMc.
Followed the instruction all the way upto flashing the internal memory with the Klipper image from your github but it wont boot so I can get an ip address. same if I use ethe…
-
Hi, how can i use the SD reader onboard instead of the one in the LCD panel?
-
Hi. I have downloaded the bigtreetech branch for SKR-PRO-V1.1. I've soldered a pin on my TCM5160 diag hole. I am using TCM5160 driver mode, not standalone, and configured the pins. Also had set the TC…
-
I was running the TTL signal oh my diode laser with pin on extension 1. Worked great. Howeverr now I have no PWM.. I even switched them pin assignment to Another PWM cabable pin No change. I c…
-
Is there a way to use 2 filament outage/motion sensors at once on the touchscreen for use with dual extrusion?
-
Which pins support i2c?
I want to use a BDsensor that communicates using i2c and it's not in the manual
-
Hi.
I would like to add more functionality to the TFT28/32 model but I don't know how to build it to be suitable for the screen. Do you have a tutorial or step by step guide somewhere?
I hope I …
-
I have installed a S42B (pre assembled) only on my Y axis using a SKR 1.3.
When printing in closed loop the stepper stops or will jump large distances.
I have modified my marlin 2 for the correct st…
-
Hi,
I added a 3D Touch on my **SKR 2 motherboard** on my **CR10** and when I do `auto home`, the 3D Touch probes in a vaccum, the Z axis does not come down, the 3D Touch blinks and it says `stopped…
-
- [ ] I have read the [README.md](https://github.com/flyte/pi-mqtt-gpio/blob/develop/README.md) file and visited the [Documentation](https://mqtt-io.app/) to see if the information there helps.
**A…