-
### Question
I am using the ESP32C6 development board with the official HA_ON_OFF_SWITCH example. After successful compilation, I encounter an error at runtime: 'Network(0x9761) closed, devices joini…
-
### Answers checklist.
- [X] I have read the documentation [ESP Zigbee SDK Programming Guide](https://docs.espressif.com/projects/esp-zigbee-sdk) and the issue is not addressed there.
- [X] I have up…
-
### Reproduction steps
- Use a ESP32 (chip v1.0)
- Use ESP-IDF 5.1.2
- Run the nimble SPP server example
- The ESP32 gets stuck at advertising
### Bug prevalence
always
### GitHub hash …
-
Output from `journalctl`:
`Feb 01 10:33:10 jayofelony kernel: ieee80211 phy0: brcmf_fw_crashed: Firmware has halted or crashed`
Device:
`Raspberry Pi 4`
WiFi chip:
`43455c0`
Firmware:
`ne…
-
### Describe the bug
The 2.5 WAN port is completely dead. No link, no syslog messages, nothing.
### OpenWrt version
r27494-2e626ae2d2
### OpenWrt release
SNAPSHOT
### OpenWrt target/…
-
## Environment
- Development Kit: none, custom board
- Kit version (for WroverKit/PicoKit/DevKitC): []
- Module or chip used: ESP32
- IDF version: v4.2.2
- Build System: idf.py
-…
-
编译了个兆能m2 wifi运行一两个小时这样5gwifi信号总是消失，2.4g的没问题不知道怎么回事。5G的信号要点击信号那边重启才能重新出现，
附上日志
[ 9.441534] scsi 0:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
[ 9.448579] sd 0:0:0:0: …
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hi,
I was wondering if there will be support for ESP-IDF v5.1 and v5.2?
If so, when is this to be expected?
Currently it is not possible to build the example from `examples/ota/ota_mqtt` using…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
OYTIS updated
9 months ago