-
**Describe The Bug:**
all cameras added ok to homebridge and apple home, camera thumbnail loads and refreshes however cannot view live.
**To Reproduce:**
click on camera, loads, fails
…
-
I am getting this error in my debug. Not sure if it is related or not but I often get these devices not updating with correct state in HA.
```json
{
"home_assistant": {
"installation_type": …
-
### Bug description
I added an Ewelink zb-sw01 device, which is aa zigbee connected single relay, to my Zha network. It showed up in Home Assistant as a light. I think a switch would be more appropri…
-
Greetings,
Thanks for the work you have done on this project. Your project opens up the hacking possibilities for these devices.
I prefer to keep my devices "cloud-free" (as far as possible). …
-
### What happened?
I need to reverse direction of my Sonoff ZBCurtain. When I use offcial eWelink App, then reverse (invert) option works normally, as I need.
But in Zigbee2MQTT this option (it ha…
-
### The problem
After uprading to any version of 2024.8.x I have the following 4 issues:
1) All zigbee devices are offline after the update. Slowly the Philips lights and SONOFF switches will c…
-
## The problem
## Environment
- Localtuya version: 4.1
- Last working localtuya version (if known and relevant):
- Home Assistant Core version: 2022.11.5
- [] Are you using the Home As…
-
I flashed this well over a year ago, worked great until about August last year when the ESPHome firmware no longer flashed successfully via OTA.
```
Building .pioenvs/zigbee/firmware.bin
Creating…
-
### What happened?
hi all,
different devices (for the moment I have checked with lights of various brands and models) do not change the status in the z2m dashboard;
if I act as devices->esposes o…
-
Hello,
I've seen similar issues, but do not how to solve them. I have 3xTHR316 with T&H sensors attached which work fine, like the one in green square and 3xTHR316 with T&H sensors attached which d…