-
Mattercontrol keeps on interrupting the Active USB connection to my flashforge just as it starts a print it suddenly disconnects the USB. Need Help
-
![untitled](https://user-images.githubusercontent.com/34325810/33695162-c9ff5300-dac9-11e7-889f-4d5e1eaa8159.png)
So I tried switching printer profiles and all of a sudden around 25 cura windows pop …
-
Is it possible to reduce the amount of time the extruder spends at the rest position? My printer is idling for ~10 seconds at the rest position and the ooze is fairly bad. I think this is caused by yo…
-
*.gx files are the output of FlashPrint, the FlashForge slicer. Internally, .gx files are gcode files with a small header at the top of the file. They load correctly into the gCode Viewer already, b…
-
Hello,
I'm trying to set up Cura to work with my own printer on Win 10 x64. I need Sailfish/Makerbot-ish GCODE, and it seems only Cura 2.4 has Makerbot. The printer is a FlashForge Creator (a clone…
-
Have a Monoprice Flashforge Creator with default firmware. Using Chrome. OP is Version 1.3.0 (master branch).
I have attempted to print from OP with the gpx plugin but the offset ?? is putting the …
-
Hey so I have a Qidi Tech and my friend has a Flashforge. We both use this plugin so we can connect to our printers via Octoprint and upload gcode to print. The first problem is when printing through …
-
This seems to be a re-occuring problem with my FlashForge Creator X (configured as Replicator 1 Dual extruder). Even after rebooting my Pi & Printer, trying to connect to USB gives me at least a 50% …
-
Something strange is going on...
I'm running an old Dell D530 with 32bit ubuntu 16.04 LTS and openscad 2015.3-01
I recently had an update from ubuntu and then openscad stopped rendering properly.…
-
Hello, i recently tried to get my zeepro zim working with OctoPi and everything went smooth right up untill i tried to connect to the printer. i had selected Auto serial port, 25000 baud rate and Defa…