-
Hello!
I can't get my LED panel to work as it should. I did the pattern test you see in the video: https://www.youtube.com/watch?v=a8-nj3kZqoM&t=10s
I also run Pixel time:
https: //www.youtube.com…
-
Hi!
I saw [this](https://twitter.com/FauthNiklas/status/1212510451365535746) post on Twitter showing a HUB75 FPGA board with an ECP5 instead of a Spartan-6. I plan on reverse engineering it, and I …
-
Hi Robert, really need your help here. I have got the matrix driver board and populated it
![rgb-udp](https://user-images.githubusercontent.com/59508143/84858101-1c983780-b088-11ea-88a7-cfe1463e4b4…
-
I have a currently working 16x32 LED Matrix, bought a second 64x32. Wired per diagram with latest Raspberry 3 and not getting correct output. Here is example from running demo -D 9, I've tried with --…
-
I've rewired it a few times now and each time I've had the same problem, but I'm going to try again with pretty much the last combination of changes to try, however, I wanted to ask to get advice on w…
-
From Álvaro Monares G.
> I had improve the fonts using fonts from any size (width and height), but there is at least a backward compatibility. For instance getBitmapFontRowAtXY I add the X value.
…
-
**Devices used:**
1. Esp32
2. P6 - INDOOR - RGB LED Matrix Panel - 1/16 Scan - 32x32 Pixels - 192mm x 192mm - HUB75
3. power supply 5v 60 amps
**Pinout connection:**
R0 ---> 2
G0 ---> 15
B…
-
Hi,
Currently we manufacture/assemble LED panels of different sizes.
This is our **new requirement**:
We are thinking of using 96x96 led boards and multiplex them to achieve the requi…
-
I am using the adafruit bonnet to connect to this 64 x 64 matrix purchased from ebay
hub75 - left: R1 B1 R2 B2 A C CLK OE
right: G1 GND G2 E B GND LAT GND.
No D is marked, I have 18 a…
-
**TL;DR:**
Similar code and project don't work.
I have finished a project using your LED libraries some months ago and it works wonders.
Today I have tried starting another project and I copi…