-
### Application Version
4.12.1
### Platform
Windows 10
### Printer
Ender 3
### Reproduction steps
Sliced one of my projects.
GCODE was not as I expected.
Some artifacts on model surfaces.
S…
Estnx updated
2 years ago
-
Hi,
When I'm calculating genetic distance between samples using plink, I found the result is weird to me.
The VCF file I used is :
```plain
##fileformat=VCFv4.0
##fileDate=20090805
##source=…
-
# Details
**Upgrading Valetudo:**
https://github.com/Hypfer/Valetudo/releases
First check if newer firmware is released: https://dustbuilder.dontvacuum.me/_s5.html
My current firmware: `3.…
-
Print sticks waiting for bed temperature to stabilise before turning on the extruder heater. Bed is using pid control and is very stable at requested temperature. Worked fine in RC3, anyone else had p…
-
## Describe the bug
The WiFi led keeps blinking after I connected the vacuum to my WiFi.
## To Reproduce
Just boot the vacuum.
Imagebuilder flags or reboots do not seem to change a thing.
…
-
### Application Version
4.12.0
### Platform
Microsoft Windows [Version 10.0.19043.1288]
### Printer
Snapmaker 2.0 A350
### Reproduction steps
1. Set build plate temperature initial layer higher…
-
I just noticed that, while the printer runs, the time indicator (hh:mm) keeps displaying "--:--" on my LCD display, everything else seems to work normal, as with RC3.
I'm using the `REPRAP_DISCOUNT_S…
-
## Describe the bug
My Wifi network has a " \ "and a " / " in the ssid but the network works fine on all my devices even on the robot with stock firmware and the original app.
But with valetudo t…
-
I created some zones for different rooms using the /zone tool, and at first it worked ok and I could send the robot to clean different rooms. Then at some point the coordinates seem to have changed a…
-
Hello,
after rebooting macos(10.12.4) the error 'interface tap1 does not exist' appears.
The kext is loaded and the device has the privileges for the current user.
manually "ifconfig tap1 up" resul…