-
Hi all,
I think there are some problems with SIB configuration. Possible fix included.
## Default Config
This is from the SIB1 config in `sib.conf`:
```c
sched_info =
(
{
…
mrlnc updated
6 years ago
-
Hi all,
my commercial UEs[1] failed to attach to srsENB + srsEPC. I think these are the issues:
### Attach Accept Result
Currently srsEPC sends `attach accept` with `LIBLTE_MME_EPS_ATTACH_RESULT_…
mrlnc updated
6 years ago
-
Hello, i get this error every time i start the enodeb please help me i am using bladerf x40
-
While using version [242fe9a](https://github.com/kewinrausch/srsLTE/commit/242fe9adc93ec93b6366499bcf7a359a0d53607f) of the master branch, sometimes, when I leave the eNB open for some minutes where a…
-
When I run srsue and srsenb in differemt hosts, sometimes throw std::length_error in UE or in ENB.
-
I used nextepc and srsenb to set up a 4G experimental network. When a commercial UE(USIM with custom information and had been added to HSS) accesses the network, Authentication failure (Synch failure)…
-
Issue identified in the list: http://www.softwareradiosystems.com/pipermail/srslte-users/2017-October/001192.html
While the UE is doing some activity, RRC in srsENB computes last activity in functi…
-
We have added custom hardware rf_xxx_imp.c to srsLTE and tested our SDR hardware with SRSENB; The current test environment is Amarisoft EPC SRSENB UE;
During the test, we found that the UE would di…
-
When I modified enb.conf file, set prb=15,eNB detected two preambles that happened in phy layer.But UE only transmitted one preamble.And PRACH_DETECT_FACTOR is 60.
There is part of enb.log:
19:08…
-
Branch: Master
Commit: [242fe9a](https://github.com/kewinrausch/srsLTE/commit/242fe9adc93ec93b6366499bcf7a359a0d53607f)
This error occurs just after the RACH procedures, and appears randomly (it's…