-
Found a bug? Maybe our [Slack Community](https://slack.cloudposse.com) can help.
[![Slack Community](https://slack.cloudposse.com/badge.svg)](https://slack.cloudposse.com)
## Describe the Bug
…
-
I purchased a z-axis probe for the Makerbase DLC32 v2.1 board:
t.ly/3bFiv
I wired it like this:
![probeWiring](https://github.com/makerbase-mks/MKS-DLC32/assets/8751463/30e59719-83bf-4935-b270-30…
-
I have struggled to get the homing working on my system. I am sure it is due to not understanding some of the settings in the config.h file, as well as the $flags in the GRBL system. I am trying to ge…
-
-
Hi,
I'm having some issues wiring my limit switches up with GRBL, and controlling my board via an offline controller
I've got a 3018 CNC Router setup with GRBL 1.1f (using a Woodpecker v3.4 contr…
-
Hello, I've got a Asus X670E TUF gaming Plus Wifi ... so far I can only get infos about my nVME.
Any way to help to get the support for this motherboard?
-
I'm using NC switches for my hard limit setup and an Arduino uno. The machine is self-made. Currently when connected, but with the machine(motors) switched off, the limits work as required setting off…
-
Very intriguing idea you have here, but I am having no luck with figuring out the specific wiring connections as well as the correct p-channel mosfet. Could you elaborate on the hardware you used?
-
I use the Arduino MKR Zero (SAMD21 Cortex-M0+ based) and the MKR Can shield (MCP2515 based) with your librarys.
The hardware works, I can read NMEA2000 packets interpreted as standard can extended pa…
ghost updated
1 month ago
-
http://www.arducam.com/downloads/ESP32_UNO/package_ArduCAM_ESP32S_UNO_index.json
https://dl.espressif.com/dl/package_esp32_index.json
https://git.oschina.net/dfrobot/FireBeetle-ESP32/raw/master/pack…