-
Hi, I was about to have a look into qtflow a bit. When trying to build it, I got the following error:
```
[ 29%] [FLEX][SchematicsScanner] Building scanner with flex 2.6.4
flex version 2.6.4 usag…
-
i was not able to connect to the IC testing with 5 different boards. tested with arduino uno and ESP32
this code freez on the first request on I2C, even the I2C scanner code freez try to scan the bus…
-
I don't have Vddi on my breakout board so my wiring is something like this:
VCC --> 3.3 V
GND --> GND
SCL --> A5
SDA --> A4
ADO --> GND
After reading through a lot of issues already raised, …
-
Tässä mun keskeneräistä koodii, mikäköhän pielessä Likvid kristallin kanssa ja siitä ees päin.
```
int naytto = 6;
int led = 7;
int echoPin = 8; // etaisyysmit
int trigPin = 9; // etaisyysmit
#…
-
the title says most of it, the storage scanner I have connected to my storage system is not using items when I craft something (ie, making a crafting table will give me the table but not use planks). …
-
Thanks for the code.
I am using a sparkfun pro mini 3.3v with the MPU 9250 (the one labeled MPU 92/65 on top)
I cannot connect. Could it be related to the resistors you refer to in the code comments…
-
Hi Kris,
Me again. I have been playing around the 9250 (your board) to try and get either MasterMode or FIFO working. But I kept having a problem with after I changed the registers it would not re…
-
When using the Arduino IDE you can add *.h and *.cpp files in the same directory as the sketch (ino file), and they are included by default in the build. For compatibility, this should be supported ou…
-
### Is your feature request related to a problem? Please describe.
Create a documentation on how to connect multiple Renogy batteries to one serial adapter.
### Describe the solution you'd like
_No…
-
Hi, im new to MPUs and im currently working on improving the movement of robot so that it could move straightly and turns 90 degree when an obstruction is detected, in this case I will only nid to obs…