-
Hello,
from the log I can see that my only one tuner does not tune to 1090MHz. I am in Europe, how can I change tunning from 978 to 1090MHz? Thank you
2016/02/26 01:40:01 GetTunerType: RTLSDR_T…
-
This line https://github.com/junzis/the-1090mhz-riddle/blob/e627276d5f77dd180f881f4b1e0a2694ae2f180a/adsb/airborne-position.tex#L98 renders as
![image](https://user-images.githubusercontent.com/1055…
-
Hello, I may have found a solution for FC0012 tuner.
The USB stick must first be initialized to a different frequency
-
Please provide as much as possible information to reproduce the issue.
RX 560/RX550/RX570 cards, getting about 30-35% rejects
Memory and Core underclocked and works in older version
-
Hi, you guys should look at this new Monero XMR miner.
Cast XMR
http://www.gandalph3000.com/cast_xmr/cast-xmr-optimized-cryptonight-miner-for-rx-vega/
On Vega 64 it mine at an hashrate of …
-
TL;DR: USB bulk data gets intermittently dropped on Pi 2B + kernel 4.9. The
same hardware with kernel 4.4 does not drop data; this is a regression between
raspberrypi-kernel 1.20170405-1 and 1.20170…
-
I have a new Raspberry Pi 3 and a Fitipower FC0012 tuner with a stock antenna. I've tried several different builds of Dump1090, but they all exhibit the same behavior- when I start the app, all I get …
-
1. Stratux version: stratux-v1.3b1-a6f9aaf9f5-dev.img
2. Stratux config: Raspberry Pi3 - NooElec Dual-Band NESDR Nano 2 ADS-B (978MHz UAT & 1090MHz 1090ES) - Stratux AHRS sensor - External …
-
There's a different report that both FF and WingX (probably others also) use to separate out the source of data. I'm assuming that most devices use a GDL90 0x14 "Traffic Report" but there is something…
-
**I am using RTL2832U on Kubuntu16.04.
When I am running gr-air-modes with gain 25, 2M/s sample rates, I could decode so many message without position, callsign. In the begining, I thought may be I s…