-
The first version of the SRAD altimeter will be using the RP2040 as its MCU. It's something we haven't worked with too much before, so it'll help to start writing some code for it and make sure ChibiO…
-
If I would like to send a tour result to friends I need to make now a hardcopy for example to the altimeter profile to be able to send it to friends.
It would be nice to be able to make a jpg export…
-
#### Issue details
Due to the standards adopted by different countries, the reference datum for altitude and speed settings in aviation varies. It will greatly enhance the functionality of Mission …
-
Hi Kris,
Long after purchasing I finally had the time to start the AHRS part of my EFIS. Soldered the USFS on top of teensy 3.6 and with your sketch immediately got angles which seems right... for …
-
Hi Kris,
I have the ladybug + MPU-9250 / BME280.
I sold the 2 I2C pads and GND + VCC (no more)
-->Is it great?
I trried to run this script : https://github.com/kriswiner/Dragonfly/blob/maste…
-
If I would like to send a tour result to friends I need to make now a hardcopy for example to the altimeter profile to be able to send it to friends.
It would be nice to be able to make a jpg export…
-
## Desired behavior
Provide mappings for sensor data:
- `gz.msgs.AirSpeedSensor`
- `gz.msgs.Altimeter`
## Alternatives considered
- NA.
## Implementation suggestion
The main issue i…
-
Hi Kris;
I am looking at the MPU9250_MS5637_AHRS_t3 code:
#if ADO
#define MPU9250_ADDRESS 0x69 // Device address when ADO = 1
#define AK8963_ADDRESS 0x0C // Address of magnetometer
#define …
-
The altimeter is "seeing" a hit at a range of 40 m (close to the max range) for most of the dive. It seems to work ok when it really does get close to the bottom (within 40m), and it hasn't yet caused…
-
### Aircraft Version
Development
### Build info
```json
{
"built": "2021-10-26T18:35:23+00:00",
"ref": "master",
"sha": "8deaa453296a42f887e9a13fcb238754f49674b5",
"actor": "aguther",
…