-
Current RTC testing for alarm includes only hour and minute.
Some RTCs do not allow such alarms and require more configs.
This Issue was formed from discussion below where the consensus was to hav…
-
Apollo3 Blue MCU is not able to get Dio1 interrupt of the SX1262 transceiver. For test purposes, I used sample/subsys/lorawan/class_a example project.
The code is running on RAK11720 module from RA…
-
building the samples/drivers/flash_shell for the apollo4p_evb target fails :
twister -p apollo4p_evb -T samples/drivers/flash_shell/
or
wb -p auto -b apollo4p_evb samples/drivers/flash_shell/
…
-
@gauteh do you think you could provide some standard pre compiled binaries, that can be uploaded with the SF GUI tool, similar to what I do on the OMB? :) .
-
**Describe the bug**
tests/drivers/flash/common build failure
Please also mention any information which could help others to understand
the problem you're facing:
- What target platform are you…
-
I am using the Xiao BLE nRF52840 from Seed Studio since the size is what I need (i.e. Nano 33 is too large)
However, using BLE Receiver Central, it freezes after 15-30min !!!
The sender is off …
-
## Introduction
Rather than attempting to overhaul the existing SPI interface, adding a new MSPI API may be a better option for both new and existing users.
### Problem description
The existing…
-
I planned to port Artemis Nano to Zephyr OS. After adapting the device tree and some other files, I was able to build the OS. I wanted to flash Artemis Nano with Zephyr OS. After compiling, I found ze…
-
**Describe the bug**
* samples/subsys/llext/shell_loader/
* tests/kernel/cache/*
* tests/subsys/llext/simple/*
* samples/subsys/llext/shell_loader/
Build with warnings due to a missing CMSIS …
-
Hi, I've installed AsteroidOS on my Beluga (the small one, 41mm), and I've noticed that the following things don't work:
- Tilt-to-wake
- Heart Rate Monitor
- Compass
I've SSH'd into the watc…