-
Hi,
Regarding wiring, I can't quite figure out what type of LED should be used, i.e. what voltage and amperage?
Furthermore the potentiometer seems to be connected to a 3,3V battery? Is that corre…
-
In Home Assistant, i see a "power" sensor that reports current (amperage). This seems wrong. It also seems redundant, since there is an ampsInUse (and a chargerLoadInW) sensor already. Is this a bug? …
-
### Context
At comp something shorted on the rear power distribution board. It now no longer requires the reset button to be hit to be active, and upon GLV turning on it momentarily turns on multip…
-
If the buttons on your portable speaker are not working properly or are unresponsive while plugged into a power source, please try running the speaker on battery. If the buttons perform correctly whil…
-
Hi,
If you look carefully at the TI ADS1299 datasheet material, the 'Bias' electrode is the SAME as Ground in other EEG systems. This means that a SEPARATE ground connection to the subject is NOT r…
-
Make sensor subclasses for common types, to fill in standard column data when auto creating a sensor. Make a new_sensor() method that takes type and then will either use specific subclass or generic S…
-
Cables connect all kinds of stuff. This would include:
- power cables
- ammunication conduits
- coolant tubing
- data cables (buses)
Should be able to create cable networks that have multiple endpoin…
-
At one point, strange smell wafted into the cabin that I suspect was based on every device port being in use. No heat issues or smoke but it was a funny smell.
## To Reproduce
Steps to reproduce t…
-
@christiankuttke seems like we need to add an additional fuse between the input and the 12V terminals, correct?
For the CE certification we need a bunch of additional information for the technical …
-
## Is your feature request related to a problem? Please describe.
No, there are no real issues. But "resurrecting" the departure timer service, implemented in #352 with the old backend, could all…