-
![image](https://github.com/willfarrell/docker-autoheal/assets/5350515/0fb6c880-6b0b-4429-aad8-5cb037f27241)
Any way of getting more information as to why it fails?
-
I have an autofs filesystem on /mnt/remote-pc1 that, when activated, mounts a CIFS share.
The way autofs works when pc1 is off is that programs accessing the mountpoint get "No such device" error.
T…
-
These are binary utilities used by hardinfo via popen or the like.
The Debian package is in parenthesis. Perhaps @tsimonq2 could review the package dependencies of the Debian hardinfo package to ma…
-
I have recently found that in `semodule` utility and in `libsepol` in general it is impossible to turn on maximal debug level. See https://github.com/SELinuxProject/selinux/issues/176
When Fedora's…
-
Hi,
I have noticed that when power goes down, nut is showing `input.voltage: 256.0` instead of `input.voltage: 0`
OS: Ubuntu Server 20.04.4
NUT version: 2.7.4
```
upsc ups
input.voltage: 256.0…
-
Do I need a different firmware or is there a different issue? https://networkupstools.org/ddl/APC/Smart-UPS_1500.html shows battery.temperature variable but I don't see it on the status page.
"sta…
-
### In the apcupsd tool, the output is as follows:
```
# ./apcaccess
APC : 001,027,0692
VERSION : 3.14.14 (31 May 2016) debian
CABLE : USB Cable
DRIVER : USB UPS Driver
UPSMODE : …
-
I'm running apcupsd on my Proxmox host.
Docker is running in an LXC on Proxmox. The docker stack is running apcupsd-cgi, Influxdb, Telegraf, and Grafana with apcupsd-cgi pointed at my proxmox host …
-
Create a generic driver to support Modbus devices.
It will:
- use libmodbus (http://libmodbus.org)
- support both RTU (RS232/485) and TCP communication
- support various devices (ups, meters, ...)
- …
-
Hi,
Thanks very much for this great software.
I just set up a nut infrastructure with a Linux master and Linux / Windows slaves. The configuration of upsmon on Windows (2003 and 2008 servers, 32 bit…