-
### Description
The default example is supposed to print two lines then let the user type the commands, but on the Nano 33 BLE the two lines are not printed correctly and some characters are mixed …
-
-
I'm working on Arduino Nano 33 IoT and trying to discover attributes of nearby BLE devices.
With BLE library version 1.1.3, everything works fine. But, with version 1.2.0, the Arduino device goes to…
-
Dear teemuatlut,
Thank you for the library !
I encountered an issue when using the "Simple" example on my Arduino Nano 33 BLE board with a TMC2209 board. The problem is that there is a name col…
-
https://github.com/jandrassy/WiFiEspAT
The library is fast and reliable. It can communicate with AT firmware at high baud rates without flow control, limited only by reliability of UART at chosen s…
-
### Describe the problem
Arduino board continuously dis/reconnects in the IDE. I cannot upload any sketch.
### To reproduce
1. Open the AppImage IDE by running the `./arduino-ide_2.1.1_Linux_…
-
It hasn't been detecting the PN532 at all while using the emulate_tag_ndef.ino example from this library.
I find it strange that it compiles but doesn't detect the module. Lots of 'unused variable…
-
## Current Behavior
I flashed a Betafpv ELRS Nano 2.4 Reciever with the latest version of ELRS (3.4.2) and attempted to upload a model configuration file in order to change the default values of pa…
-
How to recreate problem:
1. Connect Nano 33 BLE Sensor board with microUSB cable
2. Open Arduino IDE 1.8.19 (on Windows 10)
3. Open the Blink.ino sketch
4. Select the correct board and port in t…
-
Hi all
I'd like to change BLE TX power on arduino nano 33 ble sense board
cause, I think that it's too short ble tx/rx range
any have method to increase ble tx power?