-
Hi Iam, I am new to Github, so am not sure how to connect with you. This may not be the correct manner. Please let me know.
Thank you for this wonderful project and there should be thousands of s…
-
Hi I've wrote the code to my arduino uno with seeed studio can bus shield I've copied the ncalc and set beamng up however the cluster turns on and shows a quarter tank of fuel but doesn't show speed o…
-
Hi. I'm searching a source code that will work for another micro controller - Arduino uno\nano + Ethernet Shield. You found something like that?
-
Hi all,
I have connected Arduino UNO with ZDelivery 1,3" OLED Display I2C SSH1106 Chip 128 x 64.
I try to use a simple clock example but when i connect the Ardunio UNO at OLED.
5V --> 5V arduin…
-
### Board Name
/dev/ttyACM0 (Arduino UNO R3)
### Steps
1. Set Up Your Environment
Ensure Python 3.x is installed (preferably 3.7+).
Install the latest versions of Adafruit Blinka and Adaf…
-
Hi.
Does this code tested on https://robotdyn.com/uno-wifi-r3-atmega328p-esp8266-32mb-flash-usb-ttl-ch340g-micro-usb.html board?
-
Hi,
Is this library adaptable to be used with Arduino UNO R4 that has onboard ESP32-S3 SoC?
It would be nice connecting the PS3 controller to the arduino with adding an extra shield.
-
Hi, I would just like to modify Temperature and humidity sketch in order to be able to use it by Arduino 'UNO' Board and LoRa module, rather than 'Mega' one. Since I saw Serial1 port communication is …
-
### Boards
AMB82-mini
### External Hardware
no`
### Hardware Configuration
no
### Version
other
### IDE Name
Arduino IDE 2.3.3
### Operating System
Windows
### Auto Flash Mode
Disable
##…
-
HELLO, I THINK IT IS A GREAT JOB/PROYECT
a simple newbe question.
does this proyect need an arduino uno-cnc shield grbl 1.1 to work o just stand alone?
sorry if i bother you.
and many thanks.