-
```
What steps will reproduce the problem?
1. Install recent Arduino IDE (mentioned in summary)
2. Install arduino-tiny as described in readme.txt of arduino-tiny
3. Create boards.txt from proposed bo…
-
```
What steps will reproduce the problem?
1. Install recent Arduino IDE (mentioned in summary)
2. Install arduino-tiny as described in readme.txt of arduino-tiny
3. Create boards.txt from proposed bo…
-
Add new board definitions based on [this gist](https://gist.github.com/ah01/762576)
```c++
#if defined(__AVR_ATmega168__)
// Arduino Diecimila and older
LINE("__AVR_ATmega168__", __AVR…
-
When I ran setup.py it said MCUs 0 and there is only one MCU to choose from when starting an new project.
-
### Describe the problem
The Arduino language features are not available after startup.
### To reproduce
- Have no attached boards,
- Start IDE2,
- Select `Arduino Uno` board (can be any),…
-
The current "avrdude.conf" has the following description in three places: ".xmega", ".avr8x", and ".avrdx".
```
memory "data"
# SRAM, only used to supply the offset
offset …
-
### Describe the Bug
I tried to compile the default niu mini, and got the following output:
```
Ψ Compiling keymap with make --jobs=1 kbdfans/niu_mini:default
QMK Firmware 0.21.6
Making kbdfa…
-
It would be great to provide urboot hex files for non-default serial port. I think this is one of the major missing feature from urboot.
As per the previous discussions in avrdude, it may not be so…
-
Joerg Wunsch
Fri 02 Nov 2007 07:37:53 AM UTC
The ATmega165* family is currently not supported by avrdude.
Mostly same as ATmega169* except of the signatures.
[file #23834: atmega165a_and_derivative…
-
Some wrong entries in the `avrdude.conf` file
ATmega165: signature bytes are 0x1E, 0x94, 0x05 (not ... 0x07)
see [datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/doc2573.pdf)
ATme…