-
As commented in #1 you should think more about your overall power supply now that you're also adding USB power, including making sure you aren't back-powering either the barrel jack (J10 in V4) or USB…
-
Hi, I'd like to ask about the status of [HyperUPDI](../blob/master/UPDI/jtag2updi.md#hyperupdi).
I wanted to build a simple shield myself for Arduino Nano to extend jtag2updi with 12V booster and a…
ppetr updated
12 months ago
-
I am facing some problems while using the library with Arduino M0 Pro (ATMEL SAMD21G)
* Arduino IDE version or Toolchain: 1.8.0 (went back to an older version to be sure that the problem is not b…
4KARA updated
3 years ago
-
Hello all,
I am trying to use the Black Magic Probe to load firmware (.hex w/ bootloader) onto an ATSAME51J19A using a SWD header on a separate PCB. I have updated my BMP firmware as well as the PI…
-
On my Mac installation of Arduino and Arduino-mk, I could not get make to build. I had the following error:
```
/Users/{username}/Library/Arduino15/packages/arduino/tools/arm-none-eabi-gcc/4.8.3-201…
-
- Arduino board: itsy bitsy m0
- Arduino IDE version (found in Arduino -> About Arduino menu): platformio 6.0.2
- List the steps to reproduce the problem below (if possible attach a sketch or
…
-
http://iot-fans.xyz/2017/10/25/alios/introduce/
-
Spotted at [cnx-software.com tech blog](https://www.cnx-software.com/2024/03/26/arduino-nano-matter-board-specifications-and-price/) and thought it might be a nice MGM240S hardware board for prototype…
Hedda updated
6 months ago
-
Hi!
I am trying to set-up a bootloader for my custom board, starting from the arduino zero bootloader.
I want to communicate with an external EEPROM with I2C on pins PA22 and PA23 (SERCOM3).
I …
-
If I execute ``python build.py`` immediately after itself, I would have expected a much faster build time. It seems to be rebuilding all the files all over again.