-
Tweaking some example code from the tests:
```
lf = pl.LazyFrame(
{"A": [1, 2, 3, 4], "B": ["x", "x", "y", None]},
schema={"A": pl.Int32, "B": pl.String},
)
context…
-
This seems to imply that you can enable bands on the MR6500 that aren't on the data sheet for that model... is that accurate?
-
-
Hello, First of all, thank you for making this repository open source, and congratulations on publication at https://doi.org/10.1038/s41598-024-52007-5. We are deeply thankful for your contributions a…
-
I have LoRa radios for the 433 MHz and from docs
> 169 MHz, 433 MHz (Asia), 868 MHz (Europe) and 915 MHz (North America)
So in theory 13th harmonics for 902MHz you got is weaker than let's say …
-
Is it possible to add 5G bands since I would like to change my 5G routers bands
-
References https://github.com/lorabasics/basicstation/issues/164
Currently LBS decides what the sub band duty cycle in the EU868 region using the following function:
https://github.com/lorabasic…
-
Allow for tighter/narrowbanded frequency bands, such as higher sampling from 1-20kHz. Possible to accommodate each frequency as a band? Requesting precise measurements :) Will financially support this…
-
(As opposed to gridlines)
Have bands of alternating colors as a component to be placed behind a plot.
-
Splitting out from #96 as requested:
I'm looking for a way to produce a banded output for two color wires. #96 introduced two colors by showing the second color as stripe along the wire.
I thin…