-
### The problem
I have problems with some IKEA Trådfri devices that becomes unavailable at random. If I restart the device nothing happens but as soon as I restart Home Assistant it becomes available…
-
Then MG2X and some high end MG1X chips have enough flash and ram for using real Trust Center Link Keys and storing them in NVM3 and the community have access to the SDK for cooking firmware so its pos…
-
Silicon Labs recently released EmberZNet 6.8 (6.8.0.1) SDK with a new feature to concurrent support of multiple PANs (multi-PAN).
_Prior to EmberZNet PRO 6.8.0, the multi-network implementation lim…
Hedda updated
2 years ago
-
This is a Tuya device that has no entities and/or controls in home assistant and its a simple Zigbee Tuya dimmer. It should be very similar to many other devices like this.
1 Gang _TZE200_ip2akl4w
…
-
Would like to suggest redesigning your next Tube Gateway to have a pin-header compatible with the standard Raspberry Pi GPIO.
Similar to what fairecasoimeme did with this ZiGate-Ethernet platform w…
Hedda updated
2 years ago
-
### The problem
Around 3-4 weeks ago left and right arrow buttons stopped working for the five-button ikea remote E1524/E1810. I have three of them and all three completely ignore these buttons.
…
-
I have one LIDL / tuya LED stripe controller (with one nice MG21 module) up and running with EZSP 6.10.0.0 and its looks working OK but its my "second test network" so for the moment its only having o…
-
Have you figured out how to define the manufacturer and board name in the project before compiling the fw?
it looks like these are the keys:
.…