-
I just found https://github.com/libretiny-eu/libretiny that make platformio support bk7231.
-
I tried to flash a RTL8710BN and I couldn't open the web server view to check for the pins inputs/outputs or update OTA.
Also the device was not discovered automatically in the esphome web view. The …
-
**Describe the bug**
After sending a lot of MQTT messages, the device randomly disconnects from the WIFI and does not reconnect automatically. Switching it on again helps, but the instability persist…
-
There is an effort at https://community.home-assistant.io/t/popular-a9-mini-wi-fi-camera-the-ha-challenge/230108/300 to add HA support for at least some of these cheap A9 cameras. They are relatively …
-
I have a battery powered door sensor based on the CBU module. I have configured it similar to the Tuya DS06 Door Sensor. I’m able to see sensor state changes on pin 16. I configured the startup com…
-
Hello, not an issue, I'm just dumping here my findings, maybe someone will find it useful.
I got myself some Hombli Smart Spots, they come with tuya version 3.3.
This is an awesome project, and he…
-
**Describe the bug**
I soldered the pins it took the dump with BK7231Flasher and flashed with "OpenBK7231T/OpenBeken" flash is success, but still no Wifi OpenBK AP.
**Firmware:**
- Version 3.2…
-
![Снимок2](https://github.com/libretiny-eu/libretiny/assets/64173457/5bb96765-caf5-4997-a5f3-b9ecdc0429d5)
read:
512 b - ltchiptool_ambz2_2024-01-03_15-34-57_efuse.bin
2 097 152 b - ltchiptool_ambz…
-
Hi -
I am repurposing a generic white label Tuya sensor by changing the BK7231 module out for an ESP32-C3 module, and running custom Ardunio code. The sensors I have use a CHT83**10** chip.
I f…
-
Hi.
I purchased BHT-002-GCLW and I have a problem communicating with it.
```
tomik67@tomik67MINT ~ $ esptool -p /dev/ttyUSB0 -b 460800 read_flash 0x00000 0x100000 originalFirmware1M.bin
esptool.…