-
**Describe the bug**
Connections to Secure MQTT server (i.e. port 8883) fail for self-signed certificates
**Firmware:**
- Version: 1.15.642
- Chip/model: BK7231T
**To Reproduce**
Steps to re…
-
**Describe the bug**
Feature request to add a new constant `$NTPOn` to indicate if NTP is configured and initialized.
**Firmware:**
- Version 1.16.9
- Chip/model: BK7231T
**Additional context…
-
I just updated from an ancient dev version to
Build on Oct 6 2022 13:15:37 version 1.12.88
Chipset BK7231T
The device died quickly (drops from wifi after a minute or two) until I setup the MQTT …
-
After an awful lot of stuffing around with failing UART flashing (fails at 2 bars trying to erase), I managed to accidentally break the TX/RX pads off the module.
I'd like to flash with SPI, but the …
-
Hello, hope all is good.
I am facing an issue with the Tuya Dimmer EDM-01AA-EU where it's not connecting to Wifi after reboot and I keep turning it Off and On many times before the Dimmer is connec…
-
I have done a lot of investigation into the OpenBeken basic software with different routers, and lots of people have problem, particularly with battery-driven devices, that the time to connect to the …
-
**Feature Request**
Is there a way to know if the device was power off and on again quickly?
When resetting a device we need to turn it on and off 3-5 times. This puts the chip in to a reset mode wi…
-
I have several Merkury bulbs (MI-BWXXX) that seem to loop during the AP step. Below is from a Merkury MI-BW904 on v1.0.1
```
Wiping NetworkManager configs
Scanning for open Tuya SmartLife AP
...…
-
Firstly thanks for making this project, the pool of affordable open source firmware flashable things just grew significantly. Now to my problem..
I flashed a BK7231T CCT bulb successfully with 1.12…
C0br4 updated
2 years ago
-
**Describe the bug**
I believe that the interpreter is incorrect when saying:
```
Info:EVENT:EventHandlers_ProcessVariableChange_Integer: executing command if $CH4>$CH60 then "startScript autoexec.…