-
[chown@mbp ~/Downloads/gps-sdr-sim (master *)]$ bladeRF-cli -l hostedxA9-latest.rbf
Loading fpga...
Successfully loaded FPGA bitstream!
[chown@mbp ~/Downloads/gps-sdr-sim (master *)]$ bladeRF-cli -…
-
Hi,
would it be possible/desirable to implement an interleaved SC12_Q11 format?
This way the bitrate over USB3 could be reduced at the cost of host CPU power.
My aim is to stream 2 channels at …
-
Hi. I have an up to date Arch Linux, an Bladerf 2.0 micro and osmosdr. When I use `osmocom_fft` with the native bladerf driver, everything works fine. When I use it with the soapy driver, the graph ji…
-
Hi,
please have a look on the output:
> Initializing GNSS-SDR v0.0.10 ... Please wait.
> Logging will be written at ./logs
> OsmoSdr arguments: bladerf=0
> gr-osmosdr v0.1.4-127-g4d83c606 (0…
-
Hi guys. I'm trying to do a GPS receiver with bladeRF x40. To do it, I am employing this configuration file [gnss-sdr_GPS_L1_bladeRF.conf](https://github.com/gnss-sdr/gnss-sdr/blob/master/conf/gnss-sd…
-
Hi there,
I'm trying to run kalibrate-bladeRF on my x40, i tried to run it over GSM850 and GSM900 but still no result shown, even i tried with -m. here are some info relate with my stuff
./kal -…
-
Which hardware to use?
What we already have for tinkering:
ipAccess NanoBTS DCS1800 doing strange things (red LED while powering up, details later): https://osmocom.org/projects/osmobsc/wiki/N…
-
I'm using a 10 MHz external reference and need the bladeRF to enable the PLL so it considers it. Given `setClockSource` does nothing by default and I didn't find any option to enable the PLL, I had to…
-
The issue mentioned in https://nuand.com/forums/viewtopic.php?t=3792 was apparently never created, so I'll do it now - the only test using BLADERF_META_STATUS_UNDERRUN is the digital loopback test, so…
-
I am trying to obtain longitude and latitude from the recorded GPS signal with BladeRF.
I have trouble decoding it with GNS-SDR v0.0.10. on ubuntu 18.04
Antenna 17dB gain. The IQ signal looks pre…