-
See: https://github.com/juergs/ESPEasy_BME680_TVOC
As [mentioned on the forum](https://www.letscontrolit.com/forum/viewtopic.php?p=50809#p50809)
TD-er updated
3 years ago
-
large hive, liked two T/H sensors AND data points from weather underground. BUT couldn't figure out how to get BME680 sensors working there so moved to hivecontrol. BUT now see I can only use one BME6…
-
The Bosch proprietry library for bme680 was updated recently.
Esphome uses the old version ([1.6.1480](https://github.com/boschsensortec/BSEC-Arduino-library/releases/tag/v1.6.1480)). As this version…
-
When trying to verify/compile via Arduino IDE 1.8.7 on Windows 10 Pro, the compiler fails every time on the BSEC integration component. The warning for the bme680.c also appear to be fixed in later ve…
-
Hi, I tried to run the example codes of the BME680 (read-all.py) and MLX90640 (hotspot.cpp) together in parallel on the raspberry pi, but both crashes upon attempting to run them simultaneously.
Th…
-
**Describe the bug**
Residium of serialprint into terminal from the testing of BME680 is still present in this version also for the case when debug is not turned on. This may lead into delay for RF g…
-
### The problem
I've updated my ESP8266 setups from 2021.12 to 2022.2.4 today and started wondering, because one of the devices stopped sending values to HomeAssisstant. This is an indoor environment…
-
The Block for the sensor BME680 always returns 0 for the "Calibration Value"; together with this the values for IAQ, eVOC and eCO2 remain unchanged, although the sensor should show individual readings…
-
Hi,
I'm still trying to use the Bosch lib for reading values of the BME680 (precisly to get the IAQ calculated by the BOSCH lib). Unfortunately the IAQ is stuck at 25 (and IAQ-Accuracy is at 0), wh…
-
using
https://github.com/boschsensortec/Bosch-BSEC2-Library