-
**Describe the problem you have/What new integration you would like**
The classic MagicHome LED controllers just switched from ESP8266 to an SoC called BL602, apparently based on RISC-V. I acci…
-
https://github.com/supperthomas/rt-thread/actions/runs/5400782999
-
It was reported that the python flasher script doesn't work on linux as the shebang is missing from the start. It also won't have the executable flag set, and the file formatting is CRLF, not LF.
-
facing problems in proper USB Keyboard detection after re-compile the sources for C64 and VIC20 core use.
- Keyboard very often not properly detected. Had to unplug and re-connect the HID to overco…
-
I would like to know if BT and WiFi drivers are working in linux version?
-
Flashing with DevCube v1.8.4 results in a working M0 but a completely dead D0 when following the instructions in the readme.
Verified by two Discord members, who failed to get D0 to boot when using…
-
When running the example, almost no fs type works;
fat32 - error 1 while mounting (this is after forcing it to partition by skipping the checks for empty)
exfat - error making file system type 19 …
-
Update for anyone looking at my previous two issues, which are still issues, You can use 6a4d89bfeb6d8237da3e63ac66a6207c8af1c7bf to run them still (if you wana clone read https://stackoverflow.com/qu…
-
It seems the cube software drives the dtr and rts signals of the uart while flashing in order to enable the bootloader. How are rts and dtr to be used to drive boot and en to allow flashing the bl616 …
-
Sdk Commit: 9a267ff0f9c40fce3efcd4c92a726349381a9b31
IDE: Eclipse CDT
OS: Windows 11 pro.
Hi, I'm new to this SDK, and I'm facing the error "BFLB LOAD HELP BIN FAIL" when attempting to flash the …