-
The 100 years spinup is now complete and available at /work/ab0995/a270210/runtime/awicm3-v3.1_refactoring/TCO319L137-DART/sp1950_Aleph_albedo.
-
Hi! I am working with the custom board with CM3+ and edgetpu.
During compilation of "edgetpu-minimal-example" master all is ok, I see all compiled libraries.
But after I can't compile my code with e…
-
Main processor is the [Raspberry Pi Computer module](https://www.raspberrypi.org/products/compute-module/). It uses 200 Pin SODIMM connector for connecting to the board.
This board will be compat…
-
Hi,
I have been using Haiku for a long time and decided to port CM3 to this system.
In the first step I reduced the number of packages from the pkginfo.txt file to the
minimum necessary. So make-…
-
**Description**
U-Boot of Hardknott Branch does not boot on CM3+ at all. U-Boot 2020.1 from Dunfell works as expected (after updating with @emilm 's Patch.
Setting uart_2ndstage=1 in config.tx…
-
- **Etcher version:** 1.5.96
- **Operating system and architecture:** Kubuntu 20.04 x86_64
- **Image flashed:** image_Raspbian-Fin-full.zip v0.1.0
- **Do you see any meaningful error information in…
-
Radxa cm3 + radxa taco nvme not visible in OS
-
Attempting to follow the "Getting Started: Windows" instructions with Mingw, but running into the following issues:
> pacman -S base-devel mingw-w64-x86_64-cmake mingw-w64-x86_64-ninja mingw-w64-x8…
-
Constantly asked me this question, there is no way to skip.
```
NOTICE: Unable to locate 'examples' folder.
Recovering user state from C:\Active\msys64\home\Administrator\proj\CM3_IDE.cfg1
What…
-
I used the build utility to create an image of the CM3-IO.
I used the command ```./rbuild radxa-cm3-io```.
I recorded the resulting image on the sd-card, but upon startup it gives the following err…