-
Hi,
I don't know if this is the right place to ask, but any help will be appriciated.
I have a GD32350G-START development board that PlatformIO does not seem to recognize as a device. I can sti…
-
Hello,
Has any work been done to support newer IDF versions?
I'd like to port this project to ESP32C6 to use this tiny module: https://docs.m5stack.com/en/core/M5NanoC6
However, it requires IDF 5.…
-
I can not upload Sketchs to the Micro:bit v2 from a Macbook Air M1. It keeps saying the following error messsage:
Error: No Valid JTAG Interface Configured.
Arduino: 1.8.19 (Mac OS X), Board: …
-
**Describe the bug**
I get `Failed to get information for AP ApAddress { dp: Multidrop(1002927), ap: 0 }` trying to program an RP2040 using a jixin.pro CMSIS-DAP_LU probe.
**To Reproduce**
Step…
-
### Help,
**how to fix this problem ?**
**operating system: Windows 10 64bit**
GNU MCU Eclipse OpenOCD, 64-bitOpen On-Chip Debugger 0.10.0+dev-00593-g23ad80df4 (2019-04-22-20:25)
Licensed unde…
-
上周末硬件组的人说想搞个无线下载器，就用ARM开源的CMSIS-DAP协议，结果就这一句话我自闭了四五天，终于在一篇非常棒的文章里找到了方法，因为写的太好了，所以这里我直接把原文翻译成中文，英文原文见：[usb_express:cmsis-dap [Geniekits]](http://wiki.geniekits.com/doku.php?id=usb_express:cmsis-dap)
…
-
New to hardware and MCUs in general; apologies in advance if there's something obvious going on here.
I have a Picoprobe with the latest firmware which is ostensibly connected correctly to another …
tmb updated
10 months ago
-
Pico W + Debug Probe + Windows 11 + Pico Visual Studio from Pico Setup
The probe is updated to the latest firmware.
Looks like that issue is specific to `tinyusb_dev_hid_composite` example.
The Pic…
Slion updated
5 months ago
-
Hello,
readme.md tells "Bulk endpoints for higher throughput" but make compiles a HID probe. Is it possible to compile dap42 for bulk transfer?
Thanks
-
I'm trying to run the Rust GPIO example on the T2G Body Entry Starter Kit. I seem to have the toolchain set up correctly, the code compiles, and it seems to flash but immediately halts on the microcon…