-
I have a DalyBMS which has a UART port in this UART port there is a 6 pin, But I am using only three-pin first GND second last for Tx, and last for Rx. Because RS-458 cable also used the same. and Ard…
-
**Describe the bug**
**To Reproduce**
Steps to reproduce the behavior:
Connect the MGod BMS via RS485 to USB cable to Raspberry Pi.
Logs would be like:
```
root@raspberrypi2:~# tail -f /data…
-
Hello,
it is possibil that you make your lib work with the daly bms?
i have atached the protocol that i found, and in my version the bluetooth dongle communication adress says 0x80, the pc softwar…
-
Hello !
I did the experiment on the 3S BMS and I got the following error with the `get_cell_voltages `function:
TypeError: a bytes-like object is required, not 'int' (Line https://github.com/dre…
-
Daly bms connects en disconnects every 5 to 10 seconds.
tail -f /data/log/serial-starter/current also shows the start of the dbus-serialbattery at the same time.
I use Venus Version 2.66 on my …
Barpo updated
2 years ago
-
Check compatibility with VenusOS 2.80
In Venus 2.80, the rootfs is now read-only. To install the service, you need to remount it rw (which you can do with the script /opt/victronenergy/swupdate-sc…
-
Hi,
I connected my Daly BMS using the shipped RS485 USB Adapter to my RPi4, which seems to be fine:
dmesg:
```
[ 4849.385451] usb 1-1.1.2: new full-speed USB device number 7 using xhci_hcd
[ 48…