-
Starting with release 0254, DAPLink builds "no target" firmware binaries for each HIC, meant for either standalone debug probes or cases where you don't need MSD flash programming. These builds need t…
-
There may be an issue when detaching from an IMXRT1062.
There is a report of failure to issue `kill` when attached to an IMXRT1062 on Farpatch: https://github.com/farpatch/farpatch/issues/71
Spe…
xobs updated
5 months ago
-
Hi!
I'm trying to get JLink on a Micro:Bit. It looks like I'm running:
```
# DAPLink Firmware - see https://mbed.com/daplink
Unique ID: 0000000050494e4500622003000000160000000097969901
HIC ID…
-
[已知问题] DAPLink USB 协议栈使用了 MDK 的中间件，无法使用 gcc 编译。只能使用 ARMCC5 工具链编译。ARM 官方未来可能会更换支持 gcc 工具链编译的 USB 协议栈。
详情可看以下链接：
[https://github.com/ARMmbed/DAPLink/issues/482#issuecomment-414995922](https://github…
-
This is a tricky to track down issue, so hopefully posting it here we'll find other people with the same problem...
Though we haven't ever seen or reproduced it ourselves in the foundation, a numbe…
-
**Describe the bug**
Probe-rs generates the following error when a target is not connected (or un-powered):
```
Error: An error with the usage of the probe occured
Caused by:
0: An error …
-
Hi,
I have designed a custom board using NXP MK64FX512 MCU and included the OpenSDA circuit from the FRDM-K64F board.
For OpenSDA, I have flashed the latest FRDM-K64F DAPlink bootloader and target…
-
I went to https://armmbed.github.io/DAPLink/ in search of the latest DAPLink firmware for the MAX32625PICO.
The only board found was MAX32625, which does not work.
Through trial and error I disc…
-
I compiled hex with yotta, I can't falsh to microbit, I'm a FE developer, I don't know anything about hardware, why? please help me, thank you very much!!!🙏🙏
.yotta.json
```
{
"build": {
…
-
Hi there, I'm new on here.
I hope I'm able to helping people, and receiving it as well.
So, I'm using Daplink project about two years.
I'm using the 254 revision, and I have some probl…