-
I'm only getting uplinks from my end devices when I start the packet forwarder on my sx1302. But I also want to see the downlink replies from the infrastructure (separate gateway). Is there an option …
-
hello, everyone!!
when I enable the lbt in config file ,why the all down link frames are aborted by the sys?
SET:
"lbt": {
"enable": true,
"rssi_target": …
-
Hello together,
I have a simple question regarding to the raw.io example. I want to use FSK instead of LoRa modulation. First, I have tried to change the datarate to FSK, but I think this setting i…
-
When the node receives the command `TXParamSetupReq` the network defines if the node has to limit the uplink and downlink time to 400ms (a.k.a. dwell time)
What you actually do in the current versi…
-
Capturing 2^24 samples from the raw IQ tap should take `(2**24) / 2e6` seconds (8.388 seconds), but it is computed as taking 8.0 seconds by capture here:
https://github.com/MazinLab/MKIDGen3/blob/p…
ld-cd updated
6 months ago
-
Michael pointed out:
If you want a filter which is basically flat, with no attenuation anywhere (just to enable the decimation), this isn't possible.
Setting datarate to 10, fpass and fstop to 5…
rgetz updated
6 years ago
-
Hello! I'm facing an issue with AlliedVisionCamera USB3, Model: 1800 U-1240c.
I was trying to grab images using NI MAX (is a packag in the installation of LabVIEW).
I selected the Vimba Driver in…
-
This proposal is for selecting source of floors i.e. fetched dynamically or from request req.ext.prebid.floors.
**Issue**
As per floors feature PRD https://docs.google.com/document/d/1YAt00RfQa…
-
Reviewing lfs.h and the port for esp32 I'm using here I don't see any tracking counters exposed from littlefs.
It would be helpful for embedded use to be able to retrieve counters of page writes an…
-
I have just succesfully compiled and installed nexmon on a Raspberry Pi3 Raspbian 2017-06-21 Kernel 4.9.28.
Injection seems to work, however it's quite slow and unsteady, maximum injection speed is…