-
Hello developer, I use esp32s3 n16r8 development board flash size 16M after brushing into the firmware or can not identify the wireless route, the source code needs to modify where to adapt?
-
Hey there,
I'm trying to use the atecc608a-tngtls chip built in the ESP32-S3-BOX-3. I am using GPIO8 for SDA and GPIO18 for SCL but can't find the device in an I2C scan, nor does it respond to my …
-
Hello,
I am working on **TM4C123GXL** development board, here i am able to blink led,
But i am unable to debug the things regarding flash writing/erasing, also which is not available in **probe-run*…
-
### Overview
We need to prepare the Project Boards for the forced migration that GitHub is doing in August, so that it is already working well for the team by then.
### Action Items
- [ ] copy t…
-
Tang Nano 20K is a development board, using the [GW2AR-18 QN88] FPGA, containing 20736 LUT4 logic cells and 15552 Filp-Flops.
Dertails can see;https://wiki.sipeed.com/hardware/en/tang/tang-nano-20k/n…
-
It would be very nice & helpful if you could create a parts-file for the (big) ESP-32 Development Board (2 x 15 pins)
-
[http://www.chinalctech.com/cpzx/STM32_Study_Board/354.html](http://www.chinalctech.com/cpzx/STM32_Study_Board/354.html)
[https://www.banggood.com/STM32F767-Development-Board-Cortex-M7-Small-System…
-
Hi Pierre,
I was successful in using acan2517 lib on Arduino nano with MCP2518FDClick board as sender and UNO with MCP2515 as receiver. I am unable to do the same with pico development board, The p…
-
I believe that there may be some issues with the TinyGo ST7789 display driver that manifests itself on the Pimoroni Explorer Base https://shop.pimoroni.com/products/pico-explorer-base?variant=32369514…
-
#### Description:
This ticket is meant to capture the creation of a mind map to show all the connecting pieces of the digital work that Team Osprey covers and their connection point.
#### Acceptance…